Post Reply 

Help.

Aug 16, 2013, 02:26
Post: #1
Question Help.
Hi everyone! So I'm working on a drawing and my brushes are being glitchy

1. whenever i use the paintbrush the paint doesnt completely come on the board. like it kindof "skips" where it adds paint and where it doesnt.

2. I'm trying to add color to a lineart i'm making, and the color wont change. Like I'll try to change the color from black to orange. on the palet it says the color is orange but it still shows up as black (with a paintbrush or a pencil).

Whoever can help me out i'll apreciate it Smile Thanks.
Find all posts by this user
Quote this message in a reply
Aug 16, 2013, 08:12
Post: #2
RE: Help.
Reading between the lines for both of these - some probabilities.

Quote:1. whenever i use the paintbrush the paint doesnt completely come on the board. like it kindof "skips" where it adds paint and where it doesnt.

The spacing of the brush is too large, reduce the value with the slider under the brushes dialog.
or
You have a brush dynamics enabled, choose dynamics off in the drop down menu in the tools section.
[Image: bDOkmq6.jpg]


Quote: 2...the color wont change. Like I'll try to change the color from black to orange. on the palet it says the color is orange but it still shows up as black (with a paintbrush or a pencil).

Check the color mode you are working in, if not RGB, change it to RGB
[Image: CX7OFiL.jpg]

** https://www.gimp-forum.net/ now answering questions**
Find all posts by this user
Quote this message in a reply
Aug 16, 2013, 15:38
Post: #3
RE: Help.
(Aug 16, 2013 08:12)rich2005 Wrote:  Reading between the lines for both of these - some probabilities.

Quote:1. whenever i use the paintbrush the paint doesnt completely come on the board. like it kindof "skips" where it adds paint and where it doesnt.

The spacing of the brush is too large, reduce the value with the slider under the brushes dialog.
or
You have a brush dynamics enabled, choose dynamics off in the drop down menu in the tools section.
[Image: bDOkmq6.jpg]


Quote: 2...the color wont change. Like I'll try to change the color from black to orange. on the palet it says the color is orange but it still shows up as black (with a paintbrush or a pencil).

Check the color mode you are working in, if not RGB, change it to RGB
[Image: CX7OFiL.jpg]

I cant find where the spacing bar is... I fixed the colors though and it works. Thank you soooo much!
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


GIMP ForumPortalArchiveContactTermsRSS